ENTREGA DIRECTAMENTE
A TU YATE
PAQUETES SMART
hemos seleccionado lo mejor para ti
ver paquetes
MÁS DETALLES
- The patented MOORING SPRING, produced in a special alloy of stainless steel, is extremely resistant and produces no noise, thanks to the antifriction and antisqueaking inserts.
- The spring presents replaceable components and is highly resistant to marine corrosion and perfectly adaptable to different loads of stress.
- Thanks to the wide range of sizes it achieves high performances for all types of vessels.
- The overall cushioning, at 60-70%, is given by the compression of the spring, made of a special alloy in stainless steel, with extremely high elasticity. Under high-stress conditions, the Mollaflex- elastomer component intervenes as support.
- If the steel spring breaks within the end of its technical cycle, the Mollaflex – Elastomer continues to perform its damping function, preventing accidents and damages that the boat may suffer if not properly moored, in storm conditions.
- It is very important to note, therefore, that this Mollaflex-elastomer component not only increases the load of cushioning, along with the mechanical work of the spring but may even replace the spring.
| TECHNICAL DESCRIPTION OF MOORING SPRINGS | |||||||
| Article | MPP/T-005 | MPP/T-007 | MPP/T-008 | MPP/T-009 | MPP/T-010 | MPP/T-012 | MPP/T-015 |
| Boat length | Max 7 m. | 7-9 m. | 8-11 m. | 9-12 m. | 10-16 m. | 16-25 m. | 25-35m. |
| Spring diameter | 5 mm | 7 mm | 8 mm | 9 mm | 10 mm | 12 mm | 15 mm |
| Diameter | 65 | 74 | 74 | 74 | 90 | 100 | 107 |
| Damping force | 105 kg | 200 kg | 250 kg | 350 kg | 470 kg | 750 kg | 1450 kg |
| Elastomer | // | 2 | 4 | 4 | 4 | 4 | 8 |
| Damping force increased elastomer | 105 kg | 260 kg | 325 kg | 455 kg | 611 kg | 975 kg | 2 030 kg |
| Breaking load | 2 000 kg | 3 000 kg | 4 000 kg | 6 000 kg | 10 000 kg | 20 000 kg | 35 000 kg |
| Boat weight | 1 200 kg | 1 800 kg | 2 400 kg | 3 600 kg | 6 000 kg | 12 000 kg | 21 000 kg |
| The loads of the cushioning (Damping force) are increased in the models with inserts Mollaflex-Elastomer It is recommended to use the model of the upper range when it is at the limit of the band For the correct assessment of the purchase of the mooring spring suitable for your boat, you must report the weight of the boat to value of the breaking load less than 30-40% Sidermarine exonerates from any responsibility or replacement under warranty in case of purchase of a spring non suitable for the weight of the boat and therefore undersize. | |||||||
ORDERING INFORMATION:
Allow 3-5 business days for the order to ship. Due to current situation, some shipments and deliveries may be delayed for a few days. We appreciate your patience and understanding.