Mooring Spring MPP/T-007

Sidermarine

Ref: MPP/T-007

Mooring Spring for boat 7-9 m. Boat weight up to 1800 kg. Spring wire diameter 7 mm. Shock absorber force 260 Kg. Breaking load of 3000 Kg. Patented stainless steel mooring spring, high performance, low noise inserts, replaceable friction. The materials used and the technical solutions adopted in the design phase and production appears to be very efficient. The MOLLAFLEX inserts increased the load cushioning. Components Mollaflex: N.2. Minimum order 2 pc.

€ 108

€ 84

Delivery
to your yacht

Ask
our experts

Didn't find the right one?
Make your own odrer

SIDERMARINE - Established company in SHOCK ABSORBER production for mooring springs, swivel joints and more.

The patented MOORING SPRING, produced by SIDERMARINE in a special alloy of
stainless steel, is extremely resistant and produces no noise, thanks to the antifriction
and antisqueaking inserts.
The spring presents replaceable components and is highly resistant to marine
corrosion and perfectly adaptable to different loads of stress.
Thanks to the wide range of sizes it achieves high performances for all types of
vessels.
The overall cushioning, at 60-70%, is given by the compression of the spring, made
of a special alloy in stainless steel, with extremely high elasticity. Under high-stress
conditions, the Mollaflex- elastomer component intervenes as a support.
If the steel spring breaks within the end of its technical cycle, the Mollaflex –
Elastomer continues to perform its damping function, preventing accidents and
damages that the boat may suffer if not properly moored, in storm conditions.
It is very important to note, therefore, that this Mollaflex-elastomer component not
only increases the load of cushioning, along with the mechanical work of the spring,
but may even replace the spring.

TECHNICAL DESCRIPTION OF MOORING SPRINGS MPP SERIES
Article	MPP/T-005	MPP/T-007	MPP/T-009
Diameter	5 mm	7 mm	9 mm
Spring diameter	65	74	74
Damping force	105 kg	200 kg	350 kg
Elastomer	//	2	4
Damping force increased elastomer	105 kg	260 kg	455 kg
Boat weight	1 200 kg	1 800 kg	3 600 kg
The loads of the cushioning (Damping force) are increased in the models with inserts Mollaflex-Elastomer It is recommended to use the model of the upper range when it is at the limit of the band For the correct assessment of the purchase of the mooring spring suitable for your boat, you must report the weight of the boat to value of the breaking load less than 30-40% Sidermarine exonerates from any responsibility or replacement under warranty in case of purchase of a spring non suitable for the weight of the boat and therefore undersize.

ORDERING INFORMATION:

Allow 3-5 business days for the order to ship. Due to current situation, some shipments and deliveries may be delayed for a few days. We appreciate your patience and understanding.