Certec flat inflatable fenders with cover

Certec inflatable fenders are working on the low-pressure and high volume principle. This means that your fender should never be too much inflated.

Certec Inflatable fenders fabrication:

• PVC 1100 deniers Same material as inflatable boats.
• They are assembled by high-frequency welding technology.
• The fender material offers a high UV resistance. Every fender is submitting to a 24 hours test before delivery. 

The sizes available are (widht x height):
- 50 x 80 cm
- 50 x 100 cm
- 50 x 120 cm
- 60 x 60 cm
- 60 x 80 cm
- 60 x 100 cm
- 60 x 120 cm
- 80 x 150 cm

• Inflatable fenders are exposed to temperature variations.
• A fender can get very hard under full sun and des-inflate when low-temperature.
• It is good to adapt the internal pressure of each fender in front of temperature variation.
• This point means that our fenders are well adapted for the boat with permanent people on board.
• In case of loose of airtightness of your fender, please proceed to the following stapes:
  1. Remove the cover of the bladder.
  2. Location of the hole (cover your fender of soap-water and see where the bubbles are), then des-inflate your fender.
  3. Application of the repair kit (see option)
  4. Inflate your fender and test it 24 hours.