Sealer for teak Mattco

• Mattco is a slightly amber impregnator for woods such as exotic woods (teak), regional woods (oak, pine
  ...).
• Mattco does not contain synthetic resins and polymers. It is a preparation based on a synergized combination of plant extracts, a combination of wood oils and vegetable oils.
• Mattco allows:
  - to avoid moisture uptake and delay the biological degradation of wood by microorganisms
  - to restore the initial warm tone to tarnished or bleached surfaces.
  - to highlight the fibres, grain or grain of the wood
• Mattco will not flake, yellow or crack.
• Mattco contains anti-UV agents.
• Mattco feeds the wood.

Usage:

• Mattco is used pure.
• Apply with a brush to previously cleaned, dusted and perfectly dry wood. Shake the product well before
  employment.
• Apply a 1st thin uniform and regular coat in the direction of the wood at room temperature
  minimum of 15 ° C.
• Wait a few moments and apply a 2nd coat always in the direction of the wood. Wait
  about thirty minutes for complete drying before reuse of surfaces. Maximum protection
  is effective after 12 hours at room temperature of 15 ° C (cold and humidity slow down the
  drying).
• Indicative average yield +/- 10 m2 per litre.