PACCHETTI SMART
abbiamo scelto il meglio per Lei
guardare i pacchetti
  • Casa
  • Cover for Certec cylindrical inflatable fenders

Cover for Certec cylindrical inflatable fenders

Certec
codice prodotto: COV-C1B

Cordura cover for CERTEC cylindrical fenders. Choice of color (bicolor : please note color of body and crowns on the comment of the order). 
If you want to order another colour please ask our assistants.

Ø x H
Extras
€26.00
€26.00
In offerta Esaurito
excl. VAT
Di più

 

Guideline
Boat length Recommended diameter Recommended length
Below 17 feet - Below 5 m 15 cm 2/3 of the height
of the freeboard
17 to 25 feet – 5 to 7,5 m 25 cm 2/3 of the height
of the freeboard
25 to 32 feet - 7,5 to 9,6 m 25 cm – 30 cm 2/3 of the height
of the freeboard
32 to 40 feet - 9,6 to 12,6 m 25 cm - 30 cm - 35 cm 2/3 of the height
of the freeboard
40 to 99 feet - 12,6 to 30 m 30 cm - 35 cm - 50 cm 2/3 of the height
of the freeboard
More than 99 feet – More than 30 m 50 cm - 70 cm - 100 cm - 120 cm 2/3 of the height
of the freeboard

Maintenance and repair of the fenders / What are the traps?

  • Inflatable fenders are exposed to temperature variations.
  • A fender can get very hard under full sun and des-inflate when low-temperature.
  • It is good to adapt the internal pressure of each fender in front of temperature variation.
  • This point means that our fenders are well adapted for the boat with permanent people on board.
  • In case of loose of airtightness of your fender, please proceed to the following stapes:
    1. Remove the cover of the bladder.
    2. Location of the hole (cover your fender of soap-water and see where the bubbles are), then des-inflate your fender.
    3. Application of the repair kit (see option)
    4. Inflate your fender and test it 24 hours.