KIT SKAI

This kit contains: 1 Skai and vinyl degreaser KLINE SKAI 500ml, 1 White coloring for
skai and vinyl T.B.28 150ml, 1 Concentrated vegetable cleaner skai and vinyl SUPCLEAN 500ml and 1 Sponge.
KLINE SKAI is a cleaner specially developed to degrease the skai. It is made from constituents
selected for their ability to biodegradability. KLINE SKAI removes the dull veil deposited on the saddlery and quickly removes dirt such as gummed residues, carbon, sludge, greasy dirt, traces
black, mineral or vegetable oils. KLINE SKAI restores shine effortlessly. KLINE SKAI is a product
waterproof. It leaves a hydrophobic film on the treated surface. KLINE SKAI is a cleanser that requires no rinsing. KLINE SKAI is non-corrosive and non-toxic.
Depending on the fouling state of the surface to be cleaned, KLINE SKAI can be used pure or diluted. For a degreasing where a solvent power is necessary: use pure. For regular maintenance, dilute KLINE SKAI to 50%. Apply using
a soft, lint-free cloth or a soft scraping sponge. Wipe off immediately with a clean cloth.

Tips for use: Before applying T.B.28, thoroughly clean your support with KLINE-SKAI to remove dust,
dirt and grease, let it dry and mask the parts to be protected. Shake the aerosol and pass a first layer of
dyeing by spraying at 25 centimeters from the support by regularly sweeping the surface. . Repeat operation 2 to
3 times at 10-minute intervals between each layer, until a uniform layer is obtained. The treated surface is
dries in 20 to 30 minutes. The complete polymerization is carried out in 24 hours at 20° C. Covering capacity 1.5 m2
SUPCLEAN is a preparation based on soap of vegetable origin, acid salts and vegetable extracts with strong degreasing power. SUPCLEAN quickly removes gummed residues, carbon, sludge, greasy dirt,
black traces, mineral or vegetable oils. In its pure state, SUPCLEAN is a powerful solvent that can be easily emulsified. In dilution, SUPCLEAN is a powerful alkaline detergent. SUPCLEAN is non-corrosive and non-toxic.
Instructions for use: Depending on the fouling state of the surface to be cleaned, SUPCLEAN can be used pure or diluted. For a
degreasing where a solvent power is necessary: use pure. For regular maintenance, dilute SUPCLEAN to 50%.
In both cases, rinse with water