TENDER AERMARINE LONGSHORT 360/220

Hi LongShort sequence of use (garage)

• With the tender underway, you reach the stern of the yacht.
• Fold down the transom by retracting the outboard.
• Recovery from the water by inserting the bow of the tender in the garage.
• Open the valve located at the stern, only the bow compartment and the cones will deflate, also a part of the hull will collapse. It is then sufficient to pull a rope to reduce the length of the tender to 2.20 meters, (without any assembly-disassembly operation).
• After shortening, complete the insertion in the garage.

Work in reverse for launching, that is:

• Partially extract the tender from the garage
• Inflate from the aft valve, the collapsed parts of the hull and the tubular will unfold autonomously bringing the tender back to a length of 3.60 meters.
• Once inflation is complete, put the tender in the water and raise the outboard to navigation position.

Note: the use of an electric vacuum / inflator speeds up and simplifies deflation and inflation, (time 40 seconds)

LongShort OPEN - benches and bow cushion OPTIONAL
LongShort KART - console + 2 benches and bow cushion included
LongShort EXECUTIVE - complete console, bilge pump and light 360 included